The Garage Guide

Advice from the workshop floor.

Buying guides, installation know-how and straight answers about garage equipment — written by the people who supply and fit it.

Full-rise scissor lift raising a car to working height in a workshop
9 September 2026

Scissor Lifts Explained: Low-Rise, Full-Rise and Flush-Mounted

Scissor lifts are dismissed early and regretted later. What the range covers, and where they are the right answer rather than a compromise.

Read guide →
Car raised on an asymmetric two-post lift with the driver's door open between the columns
8 September 2026

Symmetric vs Asymmetric Two-Post Lift Arms

Two identical-looking lifts can behave very differently, and the reason is usually the arms. Symmetric or asymmetric, two-stage or three,...

Read guide →
Electric car raised on a two-post lift showing the flat battery pack across the underside
7 September 2026

Preparing Your Workshop for Electric Vehicles

EVs are out of warranty and looking for an independent garage. What genuinely changes — lifting points, weight, high voltage safety — and...

Read guide →
ADAS calibration target frame set up in front of a car in a workshop
4 September 2026

ADAS Calibration: What Independent Garages Need to Know

Cameras and radar are on almost every modern car, and ordinary garage jobs disturb their aim. When calibration is required, what it needs...

Read guide →
Inspection engineer recording a fault on a vehicle lift using a tablet
28 August 2026

Your Lift Failed Its Thorough Examination — What Happens Next

What a defect finding actually means, what you are obliged to do, and how to get the bay back into service properly.

Read guide →
Panel van raised on a four-post lift in a commercial workshop
27 August 2026

Lifting Vans and Light Commercials: What Changes

Vans differ from cars in weight, dimensions, construction and where they can safely be picked up. What actually changes when you take on ...

Read guide →
Four-wheel alignment being carried out with measurement targets clamped to each wheel
26 August 2026

Is Wheel Alignment Worth Adding to Your Garage?

Alignment is consistently among the highest-margin services a workshop can offer. The business case, honestly — including what it takes t...

Read guide →
Technician mounting an alloy wheel onto the cone shaft of a wheel balancer
25 August 2026

Choosing a Wheel Balancer: Static, Dynamic and Diagnostic

The three balancing methods, what separates a capable machine from a cheap one, and the habits that stop wheels coming back.

Read guide →
Technician operating an automatic tyre changer with an alloy wheel clamped on the turntable
24 August 2026

Tyre Changer Buying Guide for UK Garages

Swing-arm, tilt-back or leverless — what separates the three types, which specifications actually matter, and the mistakes that cost mone...

Read guide →